The day began with consideration of whether we should cut the thrust axis with circular clutch fork and take a bite, as it had been blocked by the broken screw inside. Indeed preventively and we requested replacements . |
| EL CUERPO DEL DELITO |
The good offices of Gonzalo "Delta Carburació Sport" and an accurate trephination fork to reach the opposite end of the broken bolt inside, has solved the problem without any damage to the shaft and fork easily repairable damage.
BODY OF CRIME
Unarmed and defeated the rebel screw can rebuke the process. Now if you can mount the thrust bearing press .
The repair of the fork , required to fill the hole with weld and reinforce the fork. With the strengthening of the weld has been better than new .
... and then build a new steel screw lock , even reproduced the system also safe with a steel wire to prevent unwanted movement .
.... AND NOW THE REUNION , chassis and engine are again.
Since qua was necessary to remove the gearbox to solve the problem of " crazy screw " assembly is mounted outside the engine mount assembly and gearbox. You can also observe the starter ( black ) .
The photo is spectacular. The length of the whole fan from the nose to the right to the left overdrive makes driving all the air is not easy.
 |
| Vision frontal |
front Vision
The engine already installed inside the enclosure - motor.
 |
| El motor ya instalado en el interior del recinto-motor. |
Vision finned aluminum crankcase, to the right hand brake is appreciated.
 |
No comments:
Post a Comment